Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: Sequoia Doc ID: RM000003GS2000X
Title: EXTERIOR PANELS / TRIM: BACK DOOR OUTSIDE GARNISH: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

2. REMOVE BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

3. REMOVE BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

4. REMOVE BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

5. REMOVE BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

7. REMOVE BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

8. REMOVE REAR TELEVISION CAMERA ASSEMBLY PARK ASSIST / MONITORING: TELEVISION CAMERA: REMOVAL (2008 Sequoia)+

9. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY



(a) Remove the 4 nuts.

(b) Disconnect the connector.

(c) Disengage the 2 clips and remove the back door outside garnish.

10. REMOVE LICENSE PLATE LIGHT ASSEMBLY

(a) Remove the 4 screws.

(b) Disconnect the 4 harness clamps and remove the license plate light.